CARA KONFIGURASI ANTAR ROUTER DENGAN ROUTER RIP

ok, langsung aja kita mulai!

hal yang prtama kita harus mulai adalah buka aplikasi Packet tracer dulu, kalo gak punya bisa DOWNLOAD DISINI
setelah kita buka aplikasi Packet Tracer, Siapkan 10Pc, 5swich, dan 5router dan sambungkan seperti gambar di bawah :

masih bingung kan????
ok, tenang aja kita kupas satu persatu,

cara pertama untuk menyambung 2Pc dengan swich gunakan kabel straight begitupun kabel swich yang menghubung router & 1pc menggunakan kabel console lihat dibawah :

menghubungkan router dengan kabel DCE seprti gambar dibawah:

Nah sekarang pengaturan Router 1:
Router>en
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#hostname LAB_A

Router>en
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#interface fas 0/0
Router(config-if)#ip add 192.5.5.1 255.255.255.0
Router(config-if)#no sh

Router>en
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#interface fas 1/0
Router(config-if)#ip add  205.7.5.1 255.255.255.0
Router(config-if)#no sh

Router>en
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#int se 2/0
Router(config-if)#ip add 201.100.11.1 255.255.255.0
Router(config-if)#clock rate 64000
Router(config-if)#no sh

Router>en
Router#conf t
Router(config)#router rip
Router(config-router)#ver 2
Router(config-router)#net 201.100.11.0
Router(config-router)#net 192.5.5.0
Router(config-router)#net 205.7.5.0



Pengaturan Router 2:
Router>en
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#hostname LAB_B

Router>en
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#interface fas 0/0
Router(config-if)#ip add 219.17.100.1 255.255.255.0
Router(config-if)#no sh

Router>en
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#int se 2/0
Router(config-if)#ip add 201.100.11.2 255.255.255.0
Router(config-if)#clock rate 64000
Router(config-if)#no sh


Router>en
Router#conf t
Router(config)#router rip
Router(config-router)#ver 2
Router(config-router)#net 201.100.11.0
Router(config-router)#net 219.17.100.0

Router>en
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#int se 3/0
Router(config-if)#ip add 199.6.13.1 255.255.255.0
Router(config-if)#clock rate 64000
Router(config-if)#no sh

Router>en
Router#conf t
Router(config)#router rip
Router(config-router)#ver 2
Router(config-router)#net 199.6.13.0
Router(config-router)#net 219.17.100.0

Pengaturan Router 3:
Router>en
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#hostname LAB_C
Router>en
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#interface fas 0/0
Router(config-if)#ip add 223.8.151.1 255.255.255.0
Router(config-if)#no sh

Router>en
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#int se 2/0
Router(config-if)#ip add 204.204.7.1 255.255.255.0
Router(config-if)#clock rate 64000
Router(config-if)#no sh

Router>en
Router#conf t
Router(config)#router rip
Router(config-router)#ver 2
Router(config-router)#net 199.6.13.0
Router(config-router)#net 223.8.151.0

Router>en
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#int se 3/0
Router(config-if)#ip add 199.6.13.2 255.255.255.0
Router(config-if)#clock rate 64000
Router(config-if)#no sh

Router>en
Router#conf t
Router(config)#router rip
Router(config-router)#ver 2
Router(config-router)#net 199.6.13.0
Router(config-router)#net 223.8.105.0



Pengaturan Router 4:
Router>en
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#hostname LAB_D

Router>en
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#interface fas 0/0
Router(config-if)#ip add 210.93.105.1 255.255.255.0
Router(config-if)#no sh

Router>en
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#int se 2/0
Router(config-if)#ip add 204.204.7.2 255.255.255.0
Router(config-if)#clock rate 64000
Router(config-if)#no sh

Router>en
Router#conf t
Router(config)#router rip
Router(config-router)#ver 2
Router(config-router)#net 204.204.7.0
Router(config-router)#net 210.93.105.0

Pengaturan Router 5:

Router>en
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#hostname LAB_E


Router>en
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#interface fas 0/0
Router(config-if)#ip add 210.93.105.2 255.255.255.0
Router(config-if)#no sh

Pengaturan IP Pc:

SELESAI.

SELAMAT MENCOBA